Repair Of Miele Refrigerators
Repair of all types of refrigerators and freezers Miele at home in New York with a Brand Warranty for work and spare parts.
Services Of The Service Center:
- Post-warranty repair of refrigerators, freezers and wine cabinets in New York. York (Manhattan, Brooklyn) with departure at the place of installation of equipment (including at home).
- Installation, configuration, connection and adaptation of new and used refrigerators and freezers.
- Maintenance of refrigeration equipment of any type, including the extension of the warranty on used equipment.
- Sale of spare parts and consumables for Miele refrigerators and freezers from a warehouse in New York, including delivery.
Advantages of our service:
-
Check-out and diagnostics 125$
- Departure of the team of craftsmen to the address of the installation of refrigeration equipment: $ 125.
- Refrigerator malfunction diagnosis: $ 125 (included in the repair cost).
-
Any repair work
We carry out any repair work on refrigeration equipment, including soldering and welding (sealing), filling with refrigerant, as well as replacing Peltier elements (for thermoelectric wine cabinets).
-
Repair of refrigeration equipment of any type
We repair refrigeration equipment of any type: freestanding refrigerators (KF5850SD, KFN29162D), built-in refrigerators and freezers (K5122UI, K34472ID), wine cabinets, as well as industrial refrigeration units.
-
Support Hotline
Consultations on the repair and operation of Miele refrigerators and freezers (including maintenance instructions) in 24x7 mode.
-
Factory warranty
The factory warranty of the service center for the repair of Miele refrigerators and freezers is up to 5 years. See the section "Guarantees".
The main faults:
-
Does not turn on/ off
The main reasons why the refrigerator may not turn on:
- Electrical fault: mechanical damage to the outlet, plug or cord.
- Malfunction of the temperature control switch.
- Failure of the electric motor.
The reasons why the refrigerator may not turn off:
- Malfunction of the control unit (software controller).
- Temperature sensor malfunction.
- Loose fit of the door (often due to wear of the rubber seal).
- Refrigerant leak.
- Improper operation: installation next to heaters, installation of warm containers (pots, pans, other containers), etc.
-
Turns off spontaneously
The main reasons why Miele's refrigerator can spontaneously shut down:
- Low mains voltage.
- Malfunction of the start relay.
- Malfunction of the electric motor or its power supply circuits (in particular, the protective relay).
- Malfunction of the control unit (software controller).
-
Freezes badly
The main reasons for the low productivity of the refrigerator Mile:
- Excessive amount of ice in the freezer – it is necessary to defrost the refrigerator.
- Malfunction of the electric motor of the fan.
- Failure of the temperature sensor.
- Loose fitting of the door (violation of the tightness of the sealing circuit) or leakage of refrigerant (see the section "Does not turn off").
- Failure of the thermostat.
- Clogging of capillary tubes.
-
Freezes too much
The main reasons for the excessive productivity of Miele refrigerators:
- Incorrectly set operating mode settings.
- Failure of the thermostat.
- Electromagnetic valve failure.
- Malfunction of the control unit (software controller).
-
Rapid formation of snow/ice on the wall
The main reasons why a lot of snow or ice forms on the walls of the refrigerator are most often the result of improper operation:
- Installation of warm containers in the refrigerator (pots, pans, other containers).
- High performance (low temperature) is set in hot weather.
- Opening the refrigerator door too often.
-
«Short circuit»
The main reasons why the refrigerator "knocks out the plugs":
- There are current leaks to the device body or "ground".
- Insufficient power of the electrical wiring. The problem often occurs when several devices with high consumption are working in parallel: an electric kettle, an iron, a hair dryer, etc.
- Malfunction of the electrical circuits of the refrigerator (in particular, the protective relay and the power circuits of the electric motor).
- Malfunction of the electric motor itself.
-
The wall swelled up
The main causes of the Miele refrigerator wall swelling are usually related to the leakage of freon in one way or another:
- The destruction of the capillary tubes themselves.
- Violation of the tightness of the connections of capillary tubes of various cross-sections (most often when connecting with strings).
- Failure of the evaporator.
-
Error message
See Miele refrigerator error Codes or call our Service Center. Call a Technician
Major repairs:
-
Replacing the sensor panel
(from 1120$)
-
Replacing the dehumidifier filter
(from 960$)
-
Replacement of hinges (hinges)
(from 1040$)
-
Replacing the temperature sensor
(from 1200$)
-
Replacing the seal
(from 1120$)
-
Repair of the control board
(from 1680$)
-
Replacing the door handle
(from 880$)
-
Replacing the evaporator
(from 1680$)
-
Refilling with freon
(from 880$)
-
Replacing the fan
(from 1680$)
-
Replacement (repair) compressor
(from 2080$)
-
Module repair
(40% of the cost of a new one)
Error codes:
-
The main error codes of Miele refrigerators
Error code Cause, troubleshooting F0 Supply air sensor error.
To solve the problem (error F0):
- Check the condition of the flap (possible sticking).
- Check the condition of the sensor surface (ice formation is possible, in this case defrosting is required).
- Check the supply air sensor and replace it if necessary.
F1 The error of the refrigerator temperature sensor.
To solve the problem (error 01):
- Check the temperature sensor of the refrigerator compartment, replace it if necessary.
F2 Freezer temperature sensor error.
To solve the problem (error 02):
- Check the freezer temperature sensor and replace it if necessary.
F3 Freezer temperature sensor error.
Disconnection (disconnection of contacts) of the freezer temperature sensor is registered.
To solve the problem (error 03):
- Check the freezer temperature sensor and replace it if necessary.
- Check the sensor connection (contact status, etc.).
F4 Evaporator sensor error.
To solve the problem (error 04):
- Check the evaporator sensor and replace it if necessary.
- Defrost the refrigerator completely.
- Check the freon pressure, if leaks are detected, restore the tightness and refuel the refrigerator.
F5, FE Control unit error.
Diagnostics and repair of the controller at the component level are required.
01, F_, 21 Ice generation error.
To solve the problem (error F_, 21):
- Set the ice generation switch (manually) to the "Off" position.
- Check the ice formation sensor.
- Check the ice maker.
E1 Temperature sensor error.
E2 The error of the refrigerating machine (compressor-evaporator system).
E3, E4 Air flow sensor error.
To solve the problem (error E3, E4):
- Check the air flow sensor and replace it if necessary.
E5 The error of the evaporator fan.
To solve the problem (error E5):
- Check the possibility of rotation of the impeller (possible blocking by a foreign object).
- Check the working capacity of the blower fan.
- Check the fan power supply circuits.
E6 Registration of the opening of the freezer door or refrigerator compartment.
It is required to close the door.
E7 Thermal protection error.
E8 Timer error.
nA Violation of the temperature regime due to a power outage.
-
The main error codes of Miele freezers
Error code Cause, troubleshooting F39 Error of the BAE electronic unit (compressor control unit).
F40 Control unit error.
To solve the problem (error 40):
- Turn off the freezer for a few hours, then turn it on.
- If the fault persists, contact the Miele Service Center: diagnostics and repair of the control unit at the component level are required.
F111 Freezer thermostat error.
F112, F113 Thermostat error 1 (error 112) or 2 (error 113).
To solve the problem:
- Check the operability of the corresponding thermostat, replace it if necessary.
F114 Evaporator sensor error.
Disconnection (opening of contacts) of the evaporator sensor is registered.
To solve the problem (error 114):
- Check the evaporator sensor and replace it if necessary.
- Check the sensor connection (contact status, etc.).
F116 Evaporator sensor error.
Obviously erroneous data from the evaporator sensor is recorded.
To solve the problem (error 116):
- Check if the freezer is working properly.
- Check if the sensor is working properly.
F124 Freezer temperature sensor error.
Obviously erroneous data from the temperature sensor is recorded.
To solve the problem (error 124):
- Check the freezer temperature sensor and replace it if necessary.
- Check the sensor connection (contact status, etc.).
F144, F145, F146 Door condition error.
The freezer door is open:
- More than 15 minutes (error F144).
- More than 30 minutes (error F145).
- More than 45 minutes (error F146).
To solve the problem:
- Close the door.
- Check the door closing sensor.
F147 The error of the solenoid valve of the compressor unit.
To solve the problem (error 147):
- Check the valve's operability (malfunction or sticking is possible).
- Check the mains voltage (there may be a noticeable deviation downwards).
Determine the cause of the breakdown and the full cost of repair:
Question and Answer:
-
What is the reason for the Miele refrigerator to have an NA error?
The NA error indicates a violation of the temperature regime more often as a result of a power outage. If the error persists some time after the power supply is restored, try defrosting the refrigerator.
-
Good afternoon. Miele K9752 refrigerator, recently (about 2 weeks) the F2 error began to appear. What could be the problem and what should I do? So far, this does not affect the operation of the refrigerator.
Error F2 is an error of the evaporator sensor. It most often occurs either in the event of a sensor malfunction or when ice forms.
If the refrigerator is working as usual, try defrosting it.
-
The F1 error at the Miele refrigerator, the causes of its occurrence?
Error F1 is an error of the temperature sensor of the refrigerator compartment. In the vast majority of cases, it occurs due to a malfunction of the specified sensor or icing.
To solve the problem, it is necessary first of all to completely defrost the refrigerator. If the error continues to be displayed, contact the Miele Service Center.
Reviews:
-
Thank you.
Andrey, a specialist, visited our refrigerator.
If I will contact this specialist in the future, it will be to this specialist, because the previous master from another Miele service danced around the equipment for more than two hours, but did not solve the problem and could not even find a breakdown.
I recommend the company of specialists in this field and, as I understand it, with good experience in repairing faults of various types.
(12.11.2023)Allison, New York.
-
It's been too long.
The overall impression of the service is good, if not for the delivery time of some spare parts! We repaired the wine refrigerator and some kind of sensor, we had to wait 5 days.
As a result, everything was installed, everything works, but I really don't like to wait). It's good that we have two wine cabinets.
(12.06.2023)Robert, Lower Manhattan (NYC).
-
Professionally.
It took a long time to decide on the choice of service. They write beautifully everywhere, but many managers or dispatchers cannot really answer any questions.
In this company, I talked with a manager named Valentin (refrigeration repair department), explained everything very clearly and answered absolutely all questions.
(11.09.2023)Alaska, Manhattan (NY).
Any other questions? Order a callback. The response time is less than a minute.