Repair Of Miele Ovens
Repair of Miele ovens and cooktops at home in New York with a company guarantee for work and spare parts.
Services Of The Service Center:
- Post-warranty repair of Mile ovens in New York (Manhattan, Brooklyn) with departure at the place of installation of the equipment.
- Installation, configuration, connection and adaptation of new and used ovens.
- Post-warranty maintenance of ovens: complete cleaning, replacement of seals, replacement of door fasteners, etc.
- Sale of spare parts for Miele ovens and cooktops from a warehouse in New York, including on order and with delivery.
Advantages of our service:
-
Own repair shop
We have our own repair shop and modern diagnostic equipment, as a result, we make repairs of any complexity at reasonable prices and in the shortest possible time.
-
Repair on the day of the request
In the vast majority of cases, the repair of the oven is carried out in one trip when calling the master at home, or within a few hours when contacting a repair shop.
-
Repair of ovens of all types
We repair ovens of all types:
- Electric ovens (H2265, H5240B, H7464BP, H7890BP).
- Combined ovens (H7440BM, H7640BM).
- Built-in ovens (H6860BPX, H4212B).
- Cooktops
-
Check-out and diagnostics $ 125
- The cost of troubleshooting the Miele oven: $ 125 (included in the repair cost).
- Departure to the place of installation of the oven within New York (Manhattan, Brooklyn)
-
Brand Warranty
The factory warranty of the service center for the repair of Miele ovens and Cooktops is up to 5 years. See the section "Guarantees".
Main faults:
-
Does not turn on / off
The main reasons why the oven may not turn on:
- Mechanical damage to the power cord or plug.
- Low voltage in the network.
- Malfunction of the control unit (software controller).
- Failure of the rotary switch (touch panel).
- Malfunction of Ignitor Ignter fits (for gas ovens).
- Failure of the heating element or the oven temperature sensor.
- "Child protection" is enabled.
The main reasons why the oven can switch off spontaneously:
- Malfunction of the temperature controller.
- Failure of the gas control mechanism (gas ovens).
-
It does not heat well
The main reasons why Miele's oven does not heat well:
- Malfunction of the heating element.
- Failure of the heating sensor.
- Malfunction of the fan or its power supply circuits.
- Violation of the tightness of the sealing circuit (as an option – loose closing of the door).
-
The heating is not regulated
The main reasons why the Miele oven is not regulated or the heating is poorly regulated:
- Failure of the thermostat.
- Mechanical malfunction of the rotary mode switch.
- Malfunction of the heating element power supply circuits.
- Clogging of nozzles (gas ovens).
-
"Short circuit", "knocks out the plugs"
The main reasons why the oven "knocks out the plugs":
- There are current leaks to the device body or "ground" (often due to the destruction of the wiring insulation).
- Insufficient power of the electrical wiring. The problem often occurs when several devices with high consumption are working in parallel: an electric kettle, an iron, a hair dryer, etc.
- Failure of the rotary mode switch.
- Malfunction of the heating element power supply circuits.
-
Error message
See Miele Oven Error Codes or call our Service Center. Call a Technician
Main repair work:
-
Replacement of buttons, switches
(from 300$)
-
Replacement of the lighting lamp
(from 200$)
-
Replacing door hinges
(from 1200$)
-
Glass replacement
(from 700$)
-
Replacing the temperature sensor
(from 1100$)
-
Replacement of the door seal
(from 2600$)
-
Replacing the timer
(from 1200$)
-
Replacing the heating element
(from 1800$)
-
Switch Replacement
(from 1400$)
-
Replacing the fan
(from 1600$)
-
Repair of the control unit
(from 2800$)
-
Module repair
(40% of the cost)
Error codes:
-
The main error codes of Miele ovens
Error code Cause, troubleshooting F0 No errors
F5 Oven temperature sensor error.
A malfunction or short circuit of the oven temperature sensor is registered.
To solve the problem (error 05):
- Check the temperature sensor.
- Check the sensor connection circuits.
- If the problem persists, contact the Miele Service Center. The temperature sensor needs to be replaced or its connection circuits repaired.
F6 Oven temperature sensor error.
A malfunction or disconnection of the temperature sensor contacts is recorded.
To solve the problem (error 06):
- Check the temperature sensor.
- Check the sensor connection circuits.
- If the problem persists, contact the Miele Service Center. The temperature sensor needs to be replaced or its connection circuits repaired.
F7 Oven temperature sensor error.
A malfunction of the temperature sensor catalyst is registered.
F9 Oven temperature sensor error.
The absence of power supply to the temperature sensor catalyst is recorded.
F21 Grill heating error.
A malfunction of the grill heating element is registered.
To solve the problem (error 21):
- Check the grill heater.
- Check the connection circuits of the grill heater.
F22 Grill heating error.
A malfunction of the heating element fan is registered.
To solve the problem (error 22):
- Check the grill fan.
- Check the fan connection circuits.
F23 Self-cleaning error.
The pyrolytic self-cleaning temperature was not reached in the allotted time.
F30 Door condition error.
A mismatch between the door and door contact status signals is recorded.
To solve the problem (error 30):
- Check the serviceability of the door contact and its connection circuits.
F31 Door condition error.
A malfunction of the door lock is registered (the door is open).
To solve the problem (error 31):
- Check the mechanical serviceability of the door lock, replace it if necessary.
F32, F33 Door condition error.
A malfunction of the door lock is registered (the door does not close in self-cleaning mode).
To solve the problem (error 32, 33):
- Check the mechanical serviceability of the door lock, replace it if necessary.
F40 Control unit error.
To solve the problem (error 40):
- Completely disconnect the oven from the mains for a few minutes, and then turn it on again.
- If the error persists, diagnostics and repair of the controller at the component level are required.
F43, 44 Control unit error (the model type is incorrectly programmed).
To solve the problem (error 43, 44):
- Completely disconnect the oven from the mains for a few minutes, and then turn it on again.
- If the error persists, diagnostics and repair of the controller at the component level are required.
F47 Communication error.
A malfunction of the BAE/SLT interface is registered.
F48 Communication error.
An error of the BAE 02 interface sensor is registered (there is no signal from the display module).
F54 Spit error (no rotation).
To solve the problem (error 54):
- Check if the engine is working properly.
- Check the serviceability of the power supply circuits of the engine.
F55 Timer error.
An excess of the oven's automatic shutdown time is recorded.
To solve the problem (error 55):
- Check if the timer is working properly and replace it if necessary.
F57 Cooling fan error (no rotation).
To solve the problem (error 57):
- Check the possibility of rotation of the impeller.
- Check that the fan motor is working properly.
F58 Hot air supply fan error (no rotation).
To solve the problem (error 58):
- Check the possibility of rotation of the impeller.
- Check that the fan motor is working properly.
F60 Heating error.
An excess of the maximum permissible temperature is recorded.
To solve the problem (error 60):
- Check if the temperature sensor is working properly.
F61 Power module error.
There is no voltage on the 12V bus.
F89, F90 Oxygen sensor error.
To solve the problem (error 89, 90):
- Check the oxygen sensor and replace it if necessary.
F102 The "smart home" error.
A connection error with the smart home is registered.
To solve the problem (error 102) check your Wi-Fi connection.
F103 The "smart home" error.
A hardware compatibility error or connection method error is logged.
Determine the cause of the breakdown and the full cost of repair:
Question and Answer:
-
Hello. The Miele P4640 oven has an error of 90, while the oven is working as usual. What is the problem and what should I do? Thank you in advance.
In general, the F90 error is an oxygen sensor error. In most cases, this sensor needs to be replaced, they fail after a certain period of operation.
In rare cases, it is enough to clean the oxygen sensor.
It is important to note that the F90 error is not a critical error: if the oven continues to work "as usual", you can take your time with the replacement.
-
What is the reason for the Miele oven to have the F23 error?
Error 23 is a self-cleaning error: in the allotted time, the temperature of 460°C required for pyrolytic self-cleaning before heating was not reached.
The error most often occurs due to a malfunction of the temperature sensor.
-
Miele oven, error 44 has appeared. What should I do?
Error 44 occurs due to a malfunction of the control unit or switching circuits. In rare cases, due to a malfunction of the controller.
Try turning off the oven for a few minutes and then turning it on. If the problem persists, contact the Service Center.
Reviews:
-
Thank you.
I ordered the repair of the display module on the Miele oven, unfortunately, I had to order a new one, because the old one went out completely.
We arrived three days later with a new spare part and solved my problem. By the way, I received a guarantee for 24 months!
(01.03.2024)Theo Harris, Manhattan (NY).
-
Reviews
I accidentally broke the glass on my oven 5460. I placed an order online, and after 10 days they brought me a new glass and installed it.
It is important that without any prepayments. The payment was made after the fact!
(12.23.2023)Bruno Hill, Madison (Brooklyn).
Any other questions? Order a callback. The response time is less than a minute.